Common questions
answered.

Costs vary based on work type, concrete thickness, reinforcement (rebar), and site accessibility. Core cutting starts from approximately ₹200–800 per hole depending on diameter. Wall and slab cutting are priced per linear meter. We provide a free on-site survey and detailed written quote before any work begins. Call +91 94472 45262 for an accurate estimate.

Yes — diamond cutting is specifically suited for occupied buildings. Our wet cutting technique suppresses concrete dust (eliminating silica hazard). Vacuum systems contain slurry, and diamond saws produce far less vibration and noise than jackhammers. We regularly work in hospitals, schools, and occupied apartments without disrupting residents or sensitive equipment.

Most core cutting jobs (1–20 holes) complete within a single day. A wall cutting job for a door opening typically takes 4–8 hours. Larger slab cuts, building demolition, and complex RCC structural work may require 2–5 days. We provide an accurate timeline during our free site survey and always have backup equipment on standby to avoid delays.

We are based in Palakkad and deploy teams across all 14 Kerala districts: Palakkad, Thrissur, Ernakulam, Malappuram, Kozhikode, Kannur, Kasaragod, Wayanad, Idukki, Kottayam, Alappuzha, Pathanamthitta, Kollam, and Thiruvananthapuram. We also serve Coimbatore and Pollachi in Tamil Nadu for select projects. Emergency response within 2 hours in Palakkad.

Yes. Our hydraulic diamond wall saws and floor saws cut through reinforced concrete with mild steel and TMT rebar. Diamond segments cut both concrete and steel without losing effectiveness. For very heavy multi-layered rebar grids, we use diamond wire saws for precise controlled cutting.

Yes — we offer 24/7 emergency support for urgent concrete cutting needs. Emergency situations include burst pipe access, structural damage repair, urgent fire safety compliance, and time-critical construction projects. Call +91 94472 45262 any time. We respond to emergencies in Palakkad within 2 hours and across Kerala within 4–6 hours.

Core cutting creates circular holes using a rotating diamond drill — used for pipes and round openings. Wall cutting (wall sawing) makes straight rectangular cuts in vertical walls using a track-mounted diamond blade — used for door openings and structural modifications. Slab cutting (floor sawing) cuts horizontal concrete slabs and floors using a walk-behind flat saw — used for trenches, expansion joints, and renovation openings.

Yes — always. We conduct a free on-site survey, assess the scope of work, and provide a written, itemised quote before any work begins. There are no hidden costs or surprise charges. You know exactly what you are paying for before we start.

We follow strict safety protocols on every site: PPE for all operators, wet cutting to suppress silica dust, slurry containment to prevent floor damage, structural survey before any load-bearing cuts, and daily toolbox talks. We carry public liability insurance and provide a safe work method statement on request.

Yes. Our hydraulic wall saws and track-mounted equipment are designed for multi-storey operation. We have completed concrete cutting projects on floors up to the 15th storey. Equipment is rigged safely, and slurry is contained to prevent it running between floors.

Our smallest core drill bit is 12mm diameter. For standard applications, we drill from 25mm (1 inch) up to 400mm (16 inches) in a single pass. For larger openings above 400mm, we use overlapping core cuts or switch to wall sawing.

Yes. All cut cores, slurry, and debris are collected and removed from your site as part of our standard service. For large demolition projects, we arrange separate debris haul-away. Sites are left clean and safe on handover.

No minimum job size. We handle single-hole core drills for residential customers and multi-thousand-square-metre slab cutting for large construction sites with the same professionalism.