Available 7 days · Emergency calls accepted 24/7
— Core Cutting
Thrissur Medical Centre, Thrissur
Scope
45 core holes, 100mm–200mm diameter, for MEP duct installations across 3 floors
Challenge
Active hospital environment — zero dust tolerance, minimal noise, and restricted working hours (10 PM–6 AM only).
Result
Completed within 2 nights using wet diamond core drills with industrial vacuum systems. Zero patient complaints. All MEP installations completed on schedule.
— Wall Cutting
Commercial Complex, MG Road, Ernakulam
Scope
6 new door openings (900mm × 2100mm) in 200mm reinforced load-bearing walls
Challenge
Load-bearing walls with heavy rebar at 150mm centres. Structural engineer on-site supervision required.
Result
All 6 openings cut clean to ±3mm tolerance with no cracks to adjacent plaster or floor finishes. Lintel installation by client's structural team on same day.
— Demolition
Industrial Area, Palakkad
Scope
Partial demolition of 1,800 sq ft single-storey RCC factory structure, retaining one wall
Challenge
Retain the shared boundary wall in perfect condition while demolishing the rest. Machinery access was restricted.
Result
Demolition completed in 3 days using hydraulic breakers and excavator. Retained wall had zero structural damage. Site cleared and handed over clean.
— Core Cutting
Residential Tower, Kozhikode
Scope
28 core holes (50mm–150mm) across 7 apartments for AC split unit installations
Challenge
Occupied residential building — no dust, no noise complaints. Scheduled floor by floor over 4 days.
Result
All 28 holes drilled on time, in sequence. No complaints from building management or residents. Clean site after each session.
— Slab Cutting
Office Building, Thrissur
Scope
2,400mm × 1,200mm slab opening cut for a new internal staircase on the 3rd floor
Challenge
Slab had post-tensioning tendons. Required X-ray scanning before cutting to map tendon locations.
Result
Tendons successfully mapped and avoided. Opening cut cleanly in one day with no tendon damage. Structural integrity maintained.
— Slab Cutting
Logistics Warehouse, Kanjikode, Palakkad
Scope
850 linear metres of expansion joint cuts, 5mm wide × 50mm deep in 150mm concrete slab
Challenge
Large area, tight timeline (3 days), continuous slab without posts to interrupt cutting lines.
Result
All 850 LM completed in 2.5 days with two walk-behind flat saws operating simultaneously. Client applied joint filler on day 3.
— RCC Cutting
Retail Mall Renovation, Malappuram
Scope
Removal of 3 RCC columns and 4 transfer beams for open-plan retail floor reconfiguration
Challenge
Live retail mall above. Temporary works designed by structural engineer. Columns had 40mm rebar at 100mm pitch.
Result
All elements removed with diamond wire saw and hydraulic wall saws. No damage to retained structure or finishes. Completed in 5 days.
— Demolition
Residential Area, Palakkad District
Scope
Full demolition of a 2,200 sq ft two-storey house for site clearance and new construction
Challenge
Adjacent houses on both sides. Vibration and dust management critical.
Result
Completed in 2 days. Adjacent structures completely undamaged. Debris separated and hauled away within 48 hours of completion.
— Core Cutting
Hotel, NH-544, Palakkad
Scope
112 core holes across 14 floors for plumbing risers and MEP services
Challenge
Hotel in operation during work. Floor-by-floor phased schedule. Each floor had to be handed back clean within 24 hours.
Result
All 112 holes drilled floor-by-floor over 6 days. Zero guest disruptions. Clean-up completed each morning before 7 AM.
YOUR PROJECT NEXT?
