Selective demolition — removing specific structural elements, rooms, or sections of a building while carefully retaining everything else — is the most common type of demolition work in renovation and extension projects across Palakkad and Kerala. Palakkad Concrete Cutting has completed over 200 selective demolition projects: from removing a single wall to demolishing an entire wing while the rest remains occupied and operational.
Remove only what you need to — precision partial demolition — Palakkad & Kerala
What is selective demolition?
Selective (or partial) demolition is the precise removal of targeted building elements — walls, floor slabs, roofs, columns, or complete sections — without affecting the retained portions of the structure. Unlike complete demolition, selective work requires careful structural analysis, installation of temporary supports where needed, precise diamond cutting to create clean boundaries, and scrupulous debris management to protect what is being kept.
What is it used for?
- Removal of internal walls for open-plan renovation
- Demolition of one building wing for extension
- Removal of a floor slab for double-height space creation
- Demolition of old flat roof for new pitched roof
- Removal of old porch or outbuilding
- Partial wall removal for new opening creation
- Demolition of one storey from a multi-storey building
- Removal of old service structures: water tanks, elevated platforms
Our process.
Structural Assessment
We assess which elements can be removed safely, what temporary supports are needed, and how the retained structure will be affected.
Boundary Definition
Clean cut lines are established using diamond wall saws or flat saws — creating a precise boundary between what is demolished and what is retained.
Temporary Support
Where removing a structural element, acrow props, needles, or beams are installed to carry load before the element is removed.
Selective Removal
Elements are removed in a planned sequence, working away from the retained structure. Care is taken not to damage retained finishes or structural elements.
Cleanup & Protection
Exposed cut faces are treated, debris fully removed, and retained areas cleaned and protected ready for the next phase of works.
Cost guide — Palakkad 2026
| Type / Size | Approx. Cost | Notes |
|---|---|---|
| Single wall removal | ₹8,000–₹25,000 | Non-structural concrete or brick wall |
| Room demolition (retained building) | ₹20,000–₹60,000 | 100–200 sq ft room, full strip |
| Wing / section removal | ₹80,000–₹3,00,000+ | Depends on size and structural complexity |
| Floor slab removal (per sq ft) | ₹50–₹120/sq ft | Including temporary support if needed |
* All prices are indicative. Final cost depends on site conditions, concrete grade, and accessibility. Contact us for a free on-site quote.
Why choose us for
selective demolition in Palakkad?
Common questions.
How do you protect my retained building during selective demolition?
Diamond sawing creates clean cut lines that stop crack propagation. We mask and board up retained finishes before demolition begins. Dust barriers prevent spread to retained occupied areas. All debris is removed carefully without dragging over retained floors.
Can a load-bearing wall be selectively demolished?
Yes — but only after a structural engineer confirms the revised load path and specifies the replacement support system (typically a steel or concrete beam). The replacement support must be installed before the wall is removed.
How long does selective demolition take?
A single wall removal typically takes 1–2 days. A full room demolition takes 2–4 days. A building wing demolition takes 1–3 weeks. We provide accurate timelines after the site survey.
GET A FREE QUOTE
Need selective demolition in Palakkad?
Free site survey · Written quote · 24/7 emergency support · All of Kerala