Interior demolition — stripping out the inside of a building while preserving the structure and exterior shell — is the starting point for commercial renovations, office refits, hotel upgrades, and home makeovers across Palakkad and Kerala. Palakkad Concrete Cutting specialises in clean, controlled interior demolition: removing partitions, old flooring, ceiling systems, wall finishes, MEP installations, and internal walls with no damage to the retained structure.
Selective interior strip-out — walls, floors, ceilings — without disturbing the shell
What is interior demolition?
Interior demolition (or interior strip-out) is the removal of interior elements — partition walls, raised floors, suspended ceilings, wall tiles, finishes, MEP fixtures, kitchen and bathroom fittings, and internal concrete walls — while the building's primary structure (columns, beams, external walls, main slabs) remain in place. Interior demolition requires careful planning: distinguishing load-bearing walls from non-load-bearing partitions, identifying MEP services to be retained or capped, and protecting remaining finishes from damage during removal.
What is it used for?
- Office refit and commercial space renovation
- Hotel room and lobby refurbishment
- Hospital renovation and ward reconfiguration
- Retail shop fit-out demolition
- Home renovation interior strip-out
- Kitchen and bathroom complete demolition
- Old tile and screed removal
- Suspended ceiling and raised floor removal
Our process.
Interior Survey
We identify load-bearing walls, MEP service routes, structural elements, and the precise scope of demolition before work begins.
Protection of Retained Elements
Floors, walls, and finishes to be kept are masked and protected. Dust barriers are erected between work zones and occupied areas.
Fixture & Fitting Removal
Doors, sanitary ware, kitchen units, and fixtures are removed carefully. Reusable items can be set aside.
Wall & Partition Removal
Non-structural partitions are removed using methods appropriate to the material — concrete, brick, drywall, or block.
Floor & Ceiling Strip
Old flooring, screed, tiles, and ceiling systems are removed. Surfaces left clean and ready for new installation.
Debris Removal
All stripped materials are sorted and removed. Site is left clean and ready for the fit-out contractor.
Cost guide — Palakkad 2026
| Type / Size | Approx. Cost | Notes |
|---|---|---|
| Single room strip-out | ₹15,000–₹35,000 | 100–200 sq ft, tile, plaster, fixtures |
| Apartment full strip-out | ₹60,000–₹1,50,000 | 800–1500 sq ft, all rooms |
| Office floor strip-out | ₹80,000–₹2,50,000 | 1000–3000 sq ft commercial space |
| Hotel room refurb demolition | ₹25,000–₹60,000 | Per room, full strip-out |
* All prices are indicative. Final cost depends on site conditions, concrete grade, and accessibility. Contact us for a free on-site quote.
Why choose us for
interior demolition in Palakkad?
Common questions.
How do I know which walls can be removed?
We always survey the structure and check against original drawings where available. Non-load-bearing partitions can be removed freely. Load-bearing walls require structural engineer confirmation before removal. We coordinate this assessment as part of our service.
Can interior demolition be done in an occupied building?
Yes — with proper planning. We use dust barriers, negative pressure systems, and out-of-hours scheduling when required for occupied offices, hotels, or hospitals.
Do you remove old ceramic and granite floor tiles?
Yes. Old tile removal is a standard part of interior demolition. Diamond equipment makes clean cuts around retained areas, and scabbling tools remove adhesive screed cleanly.
GET A FREE QUOTE
Need interior demolition in Palakkad?
Free site survey · Written quote · 24/7 emergency support · All of Kerala